TD Series Bucket Elevator

Short Description:

Over the course of multiple decades we have introduced numerous innovations in vertical conveying. This experience and pioneer spirit has allowed us to become a leader in the design and manufacturing of bucket elevators. The high quality and high capacity systems we build have proven themselves under the most demanding conditions, for instance heavy duty applications in mining or cement production.

Send email to us

Product Detail

Product Tags

Introduction

TD Series Bucket Elevator (Belt type) uses belt as dragging device, mainly used for conveying material with bulk densityρ＜1.5t/m³ in vertical direction, which can be powdery material, particles, small lump, less abrasive material. Use normal belt, the temperature of conveying material should not exceed 60℃, Use wire belt, conveying material temperature can reach 80℃, use heat resistant belt, material temperature not exceed 150℃, elevating height is 4～30m. Normal model of TD type bucket elevator is TD160、TD250、TD350、TD450 etc. The elevating height is 4.82～34m³/h. which is widely use in chemical engineering, metallurgy, construction material, mining industries etc.

Application:

Bucket elevator is designed for vertical transportation powder, granular materials and small block and grinding of small materials, such as: coal, cement, stones, sand, clay, ore and so on.

Features

1. Widely usage, it can elevate powdery material, particles, small lump material.

2. Flexible to select mixing or centrifugal discharge method according to material properties.

3. Good sealing, no dust escape. Clean and environmental protection.

4. Using rubber belt with small dead load, flexible, stable operation, thus elevating speed and process efficiency is higher.

Technical Parameter

Model	Type	Capacity (m³/h)		Hopper					Drive Revolving Speed	Max Size	Elevating Height
		Capacity (m³/h)		Volume		Bucket Pitch	Bucket Width	Speed	Drive Revolving Speed	Max Size	Elevating Height
		Deep Bucket	Shallow Bucket	Deep Bucket	Shallow Bucket	(mm)	(mm)	(m/s)	(r/min)	(mm)	(m)
TD160	Belt Type	16.00	9.0	1.20	0.49	350/280	160	1.40	67	25	4.28~39.28
TD250	Belt Type	38.00	20.00	3.00	1.12	450/360	250	1.60	61	35	3.84~38.94
TD315	Belt Type	42.00	28.00	3.75	1.95	500/400	315	1.60	61	45	4.298~38.798
TD450	Belt Type	68.00	40.00	5.90	3.10	560/480	400	1.80	55	55	3.4-38.68

Note: The volume of the hopper in the table is the volume when the hopper is filled with water, which is similar to the actual filling volume. Therefore, the filling factor is not considered in the calculation formula of the conveying volume. The filling factor should be determined according to the particle size of the material in the specific selection, so as to correct the conveying volume given in this table.