head_banner

Screw Conveyor Troughs

  • Screw conveyor and Auger Screw Parts & Components “U” Trough

    Screw conveyor and Auger Screw Parts & Components “U” Trough

    Screw conveyor and Auger Screw Parts & Components “U” Trough

  • Screw Conveyor Components

    Screw Conveyor Components

    The main purpose of screw conveyor components is to ensure the integrity of a screw conveyor systems. The screw conveyor itself is used to move bulk materials – usually grains or liquids – from one place to another.

    A screw conveyor is a type of conveyor mechanism that makes use of a rotating helical screw in the center to move liquids or granular materials from one end to the other. There are lots of key parts and screw conveyor components that make up this device, including drive shafts, screws, covers, troughs, hangers, and bearings.
  • Live Bottom Bins

    Live Bottom Bins

    Live Bottom Bins Screw Feeder

    Live Bottom Bins have proven to be an efficient way of unloading and metering large bin openings over many years.

    Live Bottom Bins are designed to provide positive discharge of a wide variety of materials from storage into process

  • Live Bottom Hoppers

    Live Bottom Hoppers

    Live Bottom Hoppers

     

    Live Bottom Bins have proven to be an efficient way of unloading and metering large bin openings over many years.

    Live bottom hoppers are also known as Live Bottom Bins, or Live Bottom Screw Feeders.

  • Live Bin Bottoms

    Live Bin Bottoms

    Live Bin Bottoms

     

    Live Bottom Bins have proven to be an efficient way of unloading and metering large bin openings over many years.

  • Live Bottom Feeder

    Live Bottom Feeder

    Live Bottom Feeder

     

     

    Live Bottom Bins have proven to be an efficient way of unloading and metering large bin openings over many years.

  • Live Bottom Extractors

    Live Bottom Extractors

    Live Bottom Extractors

     

    Live Bottom Bins have proven to be an efficient way of unloading and metering large bin openings over many years.

  • Live Bottom Bin Screw Feeder

    Live Bottom Bin Screw Feeder

    Live Bottom Bin Screw Feeder

    Live Bottom Bins have proven to be an efficient way of unloading and metering large bin openings over many years.

  • Angle 20″ Screw Conveyor Trough X 6ft Long

    Angle 20″ Screw Conveyor Trough X 6ft Long

    Screw Conveyor Troughs With over 200 standard troughs available plus custom or specially designed screw conveyor troughs, we have a trough for every bulk material handling screw conveyor application out there. A trough acts as the housing for a screw or screws dependent upon the length of the system and comes in an array of standard materials such as steel, abrasion-resistant steels, hot-dipped galvanized steel, and any other conceivable material that is required for the application at hand. ...
  • Angle 14″ Screw Conveyor Trough X 6ft Long

    Angle 14″ Screw Conveyor Trough X 6ft Long

    Screw Conveyor Troughs With over 200 standard troughs available plus custom or specially designed screw conveyor troughs, we have a trough for every bulk material handling screw conveyor application out there. A trough acts as the housing for a screw or screws dependent upon the length of the system and comes in an array of standard materials such as steel, abrasion-resistant steels, hot-dipped galvanized steel, and any other conceivable material that is required for the application at hand. ...
  • Angle 24″ Screw Conveyor Trough X 12ft Long

    Angle 24″ Screw Conveyor Trough X 12ft Long

    angle 18″ screw conveyor trough X 12ft long is fitted with structural steel angles along the trough’s top edge to provide excellent strength and rigidity. To ensure a tight fit and perfect alignment when installed, NU-Weld end flanges are continuously jig-welded on each end. Angel troughs are typically formed of hot-rolled steel, but we can also furnish them out of stainless steel or other material types that the application might require, including a hot-dipped galvanized steel. ...
  • Angle 18″ Screw Conveyor Trough X 6ft Long

    Angle 18″ Screw Conveyor Trough X 6ft Long

    angle 18″ screw conveyor trough X 12ft long is fitted with structural steel angles along the trough’s top edge to provide excellent strength and rigidity. To ensure a tight fit and perfect alignment when installed, NU-Weld end flanges are continuously jig-welded on each end. Angel troughs are typically formed of hot-rolled steel, but we can also furnish them out of stainless steel or other material types that the application might require, including a hot-dipped galvanized steel. ...
12 Next > >> Page 1 / 2