head_banner

Products

  • 10″ Conveyor Screw X 9′ 10″ Long  Right

    10″ Conveyor Screw X 9′ 10″ Long Right

    helicoid conveyor screw is a right-hand 10″ diameter, 9ft 10″ long conveyor screw manufactured from heavy-duty steel, the flight thickness next to the pipe (dimension B on the drawing below) is 3/16″ and 3/32″ on the flighting outer edge. 10″ diameter conveyor screws are manufactured by cold rolling special analysis strip steel into a continuous helix. The end result is a work-hardened smooth finished screw flighting service that is ready for operation. 10″...
  • 10″ Conveyor Screw X 9′ 10″ Long  Left

    10″ Conveyor Screw X 9′ 10″ Long Left

    helicoid conveyor screw is a left-hand 10″ diameter, 9ft 10″ long conveyor screw manufactured from heavy-duty steel, the flight thickness next to the pipe (dimension B on the drawing below) is 3/16″ and 3/32″ on the flighting outer edge. 10″ diameter conveyor screws are manufactured by cold rolling special analysis strip steel into a continuous helix. The end result is a work-hardened smooth finished screw flighting service that is ready for operation. 10″ ...
  • Angle 18″ Screw Conveyor Trough X 12ft Long

    Angle 18″ Screw Conveyor Trough X 12ft Long

    angle 18″ screw conveyor trough X 12ft long is fitted with structural steel angles along the trough’s top edge to provide excellent strength and rigidity. To ensure a tight fit and perfect alignment when installed, NU-Weld end flanges are continuously jig-welded on each end. Angel troughs are typically formed of hot-rolled steel, but we can also furnish them out of stainless steel or other material types that the application might require, including a hot-dipped galvanized steel. ...
  • Angle 20″ Screw Conveyor Trough X 12ft Long

    Angle 20″ Screw Conveyor Trough X 12ft Long

    angle 20″ screw conveyor trough X 12ft long is fitted with structural steel angles along the trough’s top edge to provide excellent strength and rigidity. To ensure a tight fit and perfect alignment when installed, NU-Weld end flanges are continuously jig-welded on each end. Angel troughs are typically formed of hot-rolled steel, but we can also furnish them out of stainless steel or other material types that the application might require, including a hot-dipped galvanized steel. ...
  • Angle 14″ Screw Conveyor Trough X 6ft Long

    Angle 14″ Screw Conveyor Trough X 6ft Long

    angle 14″ screw conveyor trough X 6ft long is fitted with structural steel angles along the trough’s top edge to provide excellent strength and rigidity. To ensure a tight fit and perfect alignment when installed, NU-Weld end flanges are continuously jig-welded on each end. Angel troughs are typically formed of hot-rolled steel, but we can also furnish them out of stainless steel or other material types that the application might require, including a h...
  • Angle 18″ Screw Conveyor Trough X 6ft Long

    Angle 18″ Screw Conveyor Trough X 6ft Long

    angle 18″ screw conveyor trough X 6ft long is fitted with structural steel angles along the trough’s top edge to provide excellent strength and rigidity. To ensure a tight fit and perfect alignment when installed, NU-Weld end flanges are continuously jig-welded on each end. Angel troughs are typically formed of hot-rolled steel, but we can also furnish them out of stainless steel or other material types that the application might require, including a hot-dipped galvanized stee...
  • Angle 10″ Screw Conveyor Trough X 10ft Long

    Angle 10″ Screw Conveyor Trough X 10ft Long

    angle 10″ screw conveyor trough X 10ft long is fitted with structural steel angles along the trough’s top edge to provide excellent strength and rigidity. To ensure a tight fit and perfect alignment when installed, NU-Weld end flanges are continuously jig-welded on each end. Angel troughs are typically formed of hot-rolled steel, but we can also furnish them out of stainless steel or other material types that the application might require, including a hot-dipped galvanized steel. ...
  • Angle 10″ Screw Conveyor Trough X 5ft Long

    Angle 10″ Screw Conveyor Trough X 5ft Long

    angle 10″ screw conveyor trough X 5ft long is fitted with structural steel angles along the trough’s top edge to provide excellent strength and rigidity. To ensure a tight fit and perfect alignment when installed, NU-Weld end flanges are continuously jig-welded on each end. Angel troughs are typically formed of hot-rolled steel, but we can also furnish them out of stainless steel or other material types that the application might require, including a hot-dipped galvanized steel. S...
  • Angle 9″ Screw Conveyor Trough

    Angle 9″ Screw Conveyor Trough

    angle 9″ screw conveyor trough X 10ft long is fitted with structural steel angles along the trough’s top edge to provide excellent strength and rigidity. To ensure a tight fit and perfect alignment when installed, NU-Weld end flanges are continuously jig-welded on each end. Angel troughs are typically formed of hot-rolled steel, but we can also furnish them out of stainless steel or other material types that the application might require, including a hot-dipped galvanized steel. S...
  • Screw Conveyor Trough – Carbon Steel Material, 6.0000 in Screw Diameter, 10 ft Overall Length

    Screw Conveyor Trough – Carbon Steel Material, 6.0000 in Screw Diameter, 10 ft Overall Length

    Screw Diameter                 6.0000 in – 6 in Trough Body Width          7 in Trough Depth                    4-1/2 in Trough Flange Width       1-1/4 in Trough Material                 Carbon Steel Trough Overall Length     10 ft Trough Overall Width      9-3/4 in Trough Thickness              14 ga Trough Type                       Angle Flanged U-Trough Trough or Cover                Trough
  • air cooling screw conveyor LH300F

    air cooling screw conveyor LH300F

    Installed after the fish meal output process of Drier to remove the most of the water vapor that comes from the fish meal during the conveying process, and achieve the cooling effect.

  • water cooling screw conveyor LH300S

    water cooling screw conveyor LH300S

    U-type screw conveyor is a kind of screw conveyor, and the production is made according to the DIN15261-1986 standard, and the design complies with JB/T7679-2008 “spiral conveyor” professional standard. U-type screw conveyor is widely used in food, chemical, building materials, metallurgy, mining, power and other departments, mainly for the transmission of small particles, powder, small pieces of material. It is not suitable to transport materials that are easily deteriorating, have larger stickiness, and have higher moisture content.